Insulated Fork Wire Connector

Specification

【SPECIFICATION】- Model: SV1.25-4S; Material: Copper; Total length: 21.5mm/0.84-Inch; Fit Cable Size: 22-16AWG;Bolt Mouth Size: 4.3mm / 0.17-Inch; Maximum Output Current: 19A;

【FEATURE】- When the insulated terminals are closely spaced from each other, it can improve the safety of insulation, prevent the bifurcation of the wires, and make it easier to insert the wires into the plug.

【ADVANTAGE 1】- The Copper Crimp Connector's shell is made of PVC, with insulation and flame retardant, high safety and good protection performance

【ADVANTAGE 2】- Electrical Crimp Connector's Pin made of metal, tight contact and good conductivity

【APPLICATION】-Insulated fork terminals widely applied in electric and electronic industry, electric equipment, Industrial automation, street lighting and power control system in traffic and transportation, posts and telecommunication, petrol chemical industry, industrial building machine-building, etc.

【Crimp Securely】 - If you solder all crimps, our spade wire connectors crimp securely, take soldering iron heat very quickly, and 60/40 solder will suck into the crimp instantly and quite nicely; a nice concave taper to the fork.

【Fit Cable Size】- Great spade wire connectors, they're not too large so they're easy to use with basic primary wire, suits cable/ wire size : 12-10AWG 4.0-6.0 sq.mm; Bolt Mouth Size (suits screw DIA) : 4.3mm / 0.169 Inch.

【High Quality】- The thickness complies with international standard, so our insulated fork spade wire connector has good electrical conductivity and also has a insulated shell which make it better performance.

【Easy Use】- With these fork spade wire connectors, a drop or two of flux and apply the heat, then a touch of tin and your done, beautiful solder joints you get!