16mm 1NO Touch Switch Illuminated LED 12V

Specification

1.Short touch to switch on/off, long press to dim your lights

2.Stianless steel housing 

3.Operation type: momentary /latching/stepless dimming/segmented dimming          

What's the Touch Switch

Touch switch, just touch it! It is different from the push button switch. You don't need to push anything, just touch it! Like touch your smartphone!

This is a perfect choice if you are in need of a fashion switch! On the front of the switch is an illuminated blue LED ring. On the back there are 4 wires, replace the ordinary terminal pins. Make switch installation a breeze!

The touch switch is rated for 7A MAX /DC 3-24V.

What's the Touch Switch Used for

Most often the Latching touch switch is used for lights (Such as critical lights, chassis lamp, dome light), or the On/Off function circuits.

About Latching Switch type

The light (device) is off when initially connecting to electricity.

The light (device) will be on and off by each touch.

Continue to cycle.

What's Note

*The touch switch can't be used on a pump.

*The input power need to be constant-voltage source. A constant-current source (like LED driver, Oupput: DC12-24V 300ma) CANNOT fit the touch switch!

*The touch switch doesn't work with wet or damp fingers.

*The touch switch cannot be used in AC circuit. Don't exceed the rating volts! Only DC 3-24V.

Specifications

Enclosure material: Stainless Steel

Protection level: IK10 IP67

Electrical life: 500,000 cycles

Operating Temperature: -20℃ ～ +55℃