30mm Push Button Switch With Socket

Specification

[ Momentary ] 30mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO+1NC SPDT, Our Push Button Switch through CE certification.

[Product size] High Round Push Button, Convex head , LED voltage: 3-250V, LED Life:40000 hours. Hole size required: 30mm (1.18 inch). Head diameter: 33.8mm (1.33"), total button length: 44.8mm (1.76"), installation thread length: 16.8mm (0.66 ") .

[Waterproof] IP67 waterproof and IK10 protection can be used in wet,dusty,outdoor environment. Mechanical life: 1,000,000 cycles, Long lifetime and good quality.

[Material] Shell material: Stainless steel 304. Head Shape:High Round ,Head material: Stainless steel 316. Contact Material: Silver Alloy.

What's Momentary Switch

Momentary switch, Push & Hold, ON; Release, OFF

The head of the button is 2.5mm higher, which makes it easier to press. The super large diameter of the head of the button is 22.5MM.

What's the Wire Connector

With the wire connector, you don't need to solder the terminals, make installing very easy Saves the issue of soldering to the switch, and possibly melting it as well You can replace the switch anytime by just unplugging the switch from its socket

What's Momentary Switch Used for

Great for electromagnetic starter, relay, Doorbell, Horn Button Switch, PC Power Switch or any circuit controls

What's Note

-These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged underwater

-The project you are going to be used for, don't let current go above 5 amps. Or the switch will get warm and to be burned out